ZTE OLT C320 Basic Commands
ZTE OLT C320 Basic Commands
### CHECKING ONT STATUS
- GPON#show gpon onu state gpon-olt_1/2/3
OnuIndex Admin State OMCC State Phase State Channel
————————————————————–
1/2/3:1 enable disable OffLine 1(GPON)
1/2/3:2 enable disable OffLine 1(GPON)
1/2/3:3 enable disable OffLine 1(GPON)
1/2/3:4 enable disable OffLine 1(GPON)
1/2/3:5 enable disable OffLine 1(GPON)
1/2/3:6 enable disable OffLine 1(GPON)
1/2/3:7 enable disable OffLine 1(GPON)
1/2/3:8 enable disable OffLine 1(GPON)
1/2/3:9 enable disable OffLine 1(GPON)
1/2/3:10 enable disable OffLine 1(GPON)
1/2/3:11 enable disable OffLine 1(GPON)
1/2/3:12 enable disable OffLine 1(GPON)
1/2/3:13 enable disable OffLine 1(GPON)
1/2/3:14 enable disable OffLine 1(GPON)
1/2/3:15 enable disable OffLine 1(GPON)
1/2/3:16 enable disable OffLine 1(GPON)
1/2/3:17 enable disable OffLine 1(GPON) => modem
1/2/3:18 enable disable working 1(GPON) => modem operate normaly
### CHECKING ONT POWER
- #show pon power attenuation gpon-onu_1/2/3:18
OLT ONU Attenuation
————————————————————————–
up Rx :no signal Tx:N/A N/A
down Tx :6.892(dbm) Rx:N/A N/A
### CHECKING ONT MAC ADDRESS
- #show mac gpon onu gpon-onu_1/2/3:18
Total mac address : 0
### CHEKING ONT UPTIME AND ONT HISTORY LOGS
- GPON#show gpon onu detail-info gpon-onu_1/2/3:18
ONU interface: gpon-onu_1/2/3:18
Name: ONU-3:18
Type: ZTE-F660
State: ready
Configured channel: auto
Current channel: 1(GPON)
Admin state: enable
Phase state: OffLine
Config state: success
Authentication mode: sn
SN Bind: enable with SN check
Serial number: ZTEGC123456F
Password:
Description: ONU-3:18
Vport mode: gemport
DBA Mode: Hybrid
ONU Status: enable
OMCI BW Profile:
Line Profile: N/A
Service Profile: N/A
ONU Distance: N/A
Online Duration: 0h 0m 0s
FEC: none
FEC actual mode: N/A
1PPS+ToD: disable
Auto replace: disable
Multicast encryption:disable
Multicast encryption current state:N/A
——————————————
Authpass Time OfflineTime Cause
1 0000-00-00 00:00:00 0000-00-00 00:00:00
2 0000-00-00 00:00:00 0000-00-00 00:00:00
3 0000-00-00 00:00:00 0000-00-00 00:00:00
4 0000-00-00 00:00:00 0000-00-00 00:00:00
5 0000-00-00 00:00:00 0000-00-00 00:00:00
6 0000-00-00 00:00:00 0000-00-00 00:00:00
7 0000-00-00 00:00:00 0000-00-00 00:00:00
8 0000-00-00 00:00:00 0000-00-00 00:00:00
9 0000-00-00 00:00:00 0000-00-00 00:00:00
10 0000-00-00 00:00:00 0000-00-00 00:00:00
### FINDING ONT BY SN NUMBER
- GPON#show gpon onu by sn ZTEGC123456F
Search result
—————–
gpon-onu_1/2/3:18
### CHECKING ONT VERSION
- GPON#show gpon remote-onu equip gpon-onu_1/2/3:18
Vendor ID: N/A
Version: N/A
SN: N/A
Admin status: unlock
Battery monitor: false
Security mode: aes
Product code: 0
Total priority queue num: 0
Total traffic schedule num:0
Traffic management option: N/A
Operate status: N/A
Equipment ID: N/A
OMCC version: 80
Security capability: aes
Model: N/A
Survival time: N/A
Total GEM port num: 0
System uptime: 0
Region code: N/A
Product SN: N/A
Chip info: 0
### CHECKNG OLT UPTIME
- GPON#show system-group
System Description: C320 Version V2.1.0 Software
Started before: 6 days, 6 hours, 24 minutes
System name: GPON
### CHECKING OLT BOARD
- GPON#show card
Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status
——————————————————————————-
1 1 2 GTGH GTGHG 16 V1.0.0 V2.1.0 INSERVICE
1 1 3 PRAM PRAM 3 V1.0.0 V1.01 INSERVICE
1 1 4 SMXA SMXA 3 V1.0.0 V2.1.0 INSERVICE
GTGOH = 16 Port (H = Hexa)
### CHECKING OLT PROCESSOR AND MEMORY
- GPON#show processor
Rack Shelf Slot CPU(5s) CPU(1m) CPU(5m) PhyMem(MB) Memory
——————————————————————————-
1 1 2 10% 13% 13% 512 38%
1 1 4 12% 8% 8% 2048 25%
### CHECKING OLT CARD TEMPERATURE
- GPON#show card-temperature
All cards temperature(deg c):
—————————————————————————-
Rack Shelf Slot Temperature Temperature(5m) Temperature(1h) Optical-Temp
—————————————————————————-
1 1 2 30 29 29 N/A.
1 1 3 30 30 30 N/A.
1 1 4 33 32 32 N/A.
### CHECKING OLT PER SLOT
- GPON#show card slotno 2
Config-Type : GTGH Status : INSERVICE
Port-Number : 16
Cpu-Alarm-Threshold : 100%
Mem-Alarm-Threshold : 100%
Real-Type : GTGHG Serial-Number : 706761801136
Phy-Mem-Size : 512MB Main-CPU : PowerPC Processor
M-CODE : 140901 Hardware-VER : V1.0.0
Cpld-VER : V1.3 Fpga-VER :
OtherfirmwareVER:pm.fw(V2.1.0)
BootROM-VER : V4.0.5 2014-12-17 13:37:42
Software-VER : V2.1.0 2017-01-17 00:40:26
Cpu-Usage : 12%
Mem-Usage : 38%
C-Code : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00EE12
Uptime : 6 Days, 6 Hours, 51 Minutes, 41 Seconds
Last restart reason : Other reason
- GPON#show card slotno 3
Config-Type : PRAM Status : INSERVICE
Port-Number : 3
Cpu-Alarm-Threshold : 100%
Mem-Alarm-Threshold : 100%
Real-Type : PRAM Serial-Number : 712151100106
Phy-Mem-Size : Main-CPU :
M-CODE : Hardware-VER : V1.0.0
Cpld-VER : Fpga-VER :
OtherfirmwareVER:
BootROM-VER :
Software-VER :
Cpu-Usage :
Mem-Usage :
C-Code : 00000000000000000000000000000000000000
Uptime :
Last restart reason : Power-off
- GPON#show card slotno 4
Config-Type : SMXA Status : INSERVICE
Port-Number : 3
Cpu-Alarm-Threshold : 100%
Mem-Alarm-Threshold : 100%
Real-Type : SMXA Serial-Number : 712068000791
Phy-Mem-Size : 2048MB Main-CPU : PowerPC Processor
M-CODE : 131201 Hardware-VER : V1.0.0
Cpld-VER : V2.3 Fpga-VER : V2.1.0
OtherfirmwareVER:
BootROM-VER : V4.0.13 2017-04-26 9:53:13
Software-VER : V2.1.0 2017-01-17 01:04:45
Cpu-Usage : 8%
Mem-Usage : 25%
C-Code : 00000000000000000000000000000000000000
Uptime : 6 Days, 6 Hours, 56 Minutes, 34 Seconds
Last restart reason : CLI Command
### CHECKING ONT IP ROUTING MODE
- gpon# show gpon remote-onu ip-host gpon-onu_1/2/1:3
Host ID: 1
HostName: omci_ipv4_dhcp_1
Identify:
IP: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Second DNS: 0.0.0.0
DHCP-enable: true
Ping-response: true
Traceroute-response:true
MAC:
KEREN.KEREN.KEREN
CurIP: 1.2.3.4
CurMask: 255.255.255.0
CurGateway: 1.2.3.4
CurPriDNS: 6.6.6.6
CurSecDNS: 7.7.7.7
### CHECKING ONT CONFIGURATION
- GPON#show run int gpon-onu_1/4/1:2
Building configuration…
!
- interface gpon-onu_1/4/1:2
descriptionIRONMAN
tcont 1 profile share
gemport 1 name ngenet unicast tcont 1 dir both
gemport 1 traffic-limit downstream 300m
gemport 2 name nontonfelm unicast tcont 1 dir both
gemport 2 traffic-limit downstream 300m
gemport 3 name tilpun unicast tcont 1 dir both
gemport 3 traffic-limit downstream 300m
switchport mode hybrid vport 1
switchport vlan 212 tag vport 1
switchport mode hybrid vport 2
switchport vlan 121 tag vport 2
switchport mode hybrid vport 3
switchport vlan 122 tag vport 3
!
end
### REBOOT ONT
- gpon#config t
- gpon#pon-onu-mng gpon-onu_1/2/1:3
- gpon(gpon-onu-mng)#reboot
### RESET FACTORY ONT
- gpon#config t
- gpon#pon-onu-mng gpon-onu_1/2/1:3
- gpon(gpon-onu-mng)#restore factory
### DISABLE/SHUTDOWN PORT ONT
- gpon#config t
- gpon#pon-onu-mng gpon-onu_1/2/1:3
- gpon(gpon-onu-mng)#interface eth eth_0/2 state lock –> disable/shutdown port number 2
### ENABLE/SHUTDOWN PORT ONT
- gpon#config t
- gpon#pon-onu-mng gpon-onu_1/2/1:3
- gpon(gpon-onu-mng)#interface eth eth_0/2 state unlock –> enable port number 2
### RELEASE RENEW ONT AS DHCP CLIENT
- GPON#config t
- Enter configuration commands, one per line. End with CTRL/Z.
- GPON(config)#pon-onu
- GPON(config)#pon-onu-mng gpon-onu_1/2/1:3
- GPON(gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false
- GPON(gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true
### CHECKING RX/TX LEVEL UPLINK PORT
- GPON#sho int optical-module-info xgei_1/21/1
Optical module information:xgei_1/21/1
Basic-info:
Vendor-Name : SOU Vendor-Pn : SPP1
Vendor-Sn : D9 Version-Lev : 10
Production-Date: 13 Module-Type : 10GBASE-LR
Wavelength : 1310 (nm) Connector : LC
Diagnostic-info:
RxPoWer : -10.1(dbm) TxPower : -1.7(dbm)
Bias-Current : 25.724 (mA) Laser-Rate : 103(100Mb/s)
Temperature : 24.184 (c) Supply-Vol : 3.324(v)
Alarm-thresh: –> Threshold
RxPower-Upper : 3 (dbm) RxPower-Lower : -34(dbm)
TxPower-Upper : 9 (dbm) TxPower-Lower : -14(dbm)
Bias-Upper : 131(mA) Bias-Lower : 0 (mA)
Voltage-Upper : 7 (v) Voltage-Lower : 0 (v)
Temperature-Upper: 90 (c) Temperature-Lower: -45(c)
### RESET SLOT CARD
- GPON#reset-card slotno 2
### SWAP
Use This for First Level Handling when you get Anomaly Process.
sometimes it can help you, but sometime isn’t
- GPON#swap
### SHOW VLAN SUMMARY
- GPON# show vlan summary
All created vlan num: 3
Details are following:
111, 222 , 333
GPON#
- GPON#show vlan 111
vlanid :111
name :VLAN00111
description :N/A
multicast-packet:flood-unknown
tpid:0x8100
port(untagged):
port(tagged):
gpon-onu_1/2/1:3:6
xgei_1/3/4
sg1
### CHECKING BANDWIDTH PROFLE
- GPON#show gpon profile traffic
