How to view information about ONU on BDCOM OLT
I’ll give you an example of viewing information about ONT (ONU) on EPON OLT BDCOM P3310C, on other models is essentially the same.
Connect to OLT and go into configuration mode:
enableconfig
To view the ONU list, use the commands:
show epon onu-informationshow epon active-onushow epon inactive-onu
Example of viewing MAC addresses on a port or ONU:
show mac address-table interface EPON0/1show mac address-table interface EPON0/1:5show mac address-table brief
View the optical power that comes from the OLT to the ONU (ONU RX):
- show epon interface ePON 0/1:5 onu ctc optical-transceiver-diagnosis
View the optical power that comes from ONU to OLT (OLT RX):
|
View ONU models and firmware versions:
show epon onu-software-versionshow epon onu-software-version interface EPON 0/1
View description and status of interfaces:
- show interface brief
ONU ethernet port status and viewing statistics:
show epon interface epON 0/1:1 onu port 1 stateshow epon interface epON 0/1:1 onu port 1 statisticsshow epon interface epON 0/1:1 onu mac address-table
Also you can see in the saved and active OLT configuration which ONUs are registered:
show configurationshow running-config
ONU reboot example:
- epon reboot onu interface ePON 0/1:1
Read Also :
