Enable the UBNT Compliance Test ( Working Method )
Enable the UBNT Compliance Test ( Working Method )
If the PowerBeam point is already flashed above 5.5.6 and cannot be updated, then we are downloading the latest firmware via TFTP. At the time of this writing, I was using 5.6.3. How to do this I wrote in this article: Ubiquiti (UBNT) device recovery.
After completing the firmware process via the web interface, do not go (otherwise you will have to reset the settings and do it again), but connect via SSH using, for example, the PuTTY program and enter the “enable_ct” command above, or create a script, make it executable, save the settings and reboot the device by running The following commands take turns:
Need Putty ( Software )
- Login To Device Vai Putty
- 192.168.1.20
- Enter Username & Password
Then Write this Commands Step By Step
- enable_ct
- touch /etc/persistent/ ct
- save
- reboot
do at your own risk, i m no responsible for any damage.
How to enable Compliance test
enable compliance test
ubnt compliance test
compliance test
Read Also :
