Clear RAM on iPhone

Clear RAM on iPhone

Method 1: Hard Reboot

You can clear the RAM on the iPhone in order to increase performance by forcing the device to restart, which will automatically unload all previously opened applications. The easiest way to accomplish the task is to hold down the side power button, move the power off slider to the right, and then turn it on again.

If the device does not respond to touch, you can alternatively use a special button combination that differs between generations and models. In addition, a hard reset can be performed using the iTools program and some analogues like 3uTools on a Windows or MacOS computer.

Method 2: Cleanup without reboot

Any iPhone model allows you to clear the device’s RAM without restarting the operating system using a special sequence of actions. At the same time, keep in mind that freeing up RAM does not affect the display of applications in the task manager from the following method, although it leads to a forced restart of each program.

virtual home button

If you’re using an iPhone X or later with a bezel-less display, you’ll need to enable Assistive Touch first to use this feature . This is due to the fact that these devices do not have a physical button “Home” , which plays a key role in cleaning RAM.

    1. Expand the system application “Settings” on the home screen, go to the “Accessibility” category and open the “Touch” subsection . Once on the screen with the title of the same name, at the very beginning, find and tap the item “AssistiveTouch” , which is by default in the “Off” state .
  • To enable the function, it will be enough to use the “AssistiveTouch” slider and make sure that a floating button appears on one of the side faces of the screen. It’s also important to pay attention to the Customize Actions category on the AssistiveTouch page , where One Touch should be set to Open Menu .

If the required option is not available, be sure to open the One Touch section and select the specified command. In addition, a quick call to “AssistiveTouch” can be made using the “Quick Command” , the settings of which are available within the “Basic” block on the “Universal Access” screen .

Clearing RAM

After turning on AssistiveTouch , if necessary, hold down the power button on the right side of the iPhone case until the screen with the shutdown slider appears. After that, you should hold down the “Home” button for several seconds until the numeric keypad appears to re-enter the system.

If you are using a frameless device, as you might guess, you need to expand the previously activated menu using the floating button and use the Home option . This action requires a minimum of time and will be available on any model, unlike using the physical counterpart of this button.

On a smartphone with a physical Home button, you need to hold down continuous pressing several times longer, up to 10-20 seconds, until the passcode entry screen appears. Be that as it may, at the end it will be enough to enter the secret key to activate Touch ID or Face ID and, using any suitable application, make sure that the memory has been successfully cleared.

Method 3: Close apps

For the most part, an additional solution to the task at hand can be to force close previously opened applications in the task manager, available in any version of iOS. To use this feature, on bezel-less models, swipe up from the bottom of the screen and hold your finger in the center of the screen, while on devices with a Home button, it will be enough to double-tap the marked button quickly.

To close unnecessary applications, hold and swipe the corresponding thumbnails to the top of the screen, which is available for three different processes at once. As soon as this action is performed, the device’s RAM will automatically be freed some time after the forced shutdown

Read Also :